Microsoft Windows NT 4.0 Guide Guide d'installation télécharger pdf (Page 37)

Windows NT Installation Guide 29

To start the Windows NT Setup program, follow this procedure:

Insert the Microsoft Windows NT compact disc in the CD-ROM drive.

Restart your computer.

From the Boot menu, choose Supplementary menu . . . .

From the Supplementary menu, choose Install Windows NT from

CD–ROM.

Follow the instructions on the screen.

Note: If you have an Alpha Windows NT driver diskette for your video card, you

can use the driver to install Windows NT. Follow this procedure:

Choose Custom Setup.

Choose display type Other, and insert the graphics disk driver when asked

for the manufacturer-supplied hardware support disk.

4. Troubleshooting

This section provides solutions to some of the common problems that you may

encounter while using the Windows NT firmware and installing Windows NT.

Problem

When you turn on your computer, nothing displays.

Solutions

Ensure that the video card is correctly connected to the monitor.

Ensure that the flash ROM update procedure was performed correctly. If you

have a terminal attached to COM1, check the output for error messages after

verifying that the flash ROM update procedure was performed correctly.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 57 58

Pas de commentaire

Microsoft Windows NT 4.0 Guide Guide d'installation Page 37