Microsoft Windows NT 4.0 Guide Guide de l'utilisateur télécharger pdf (Page 93)

Chapter 4 Using the Microcal Diagnostic Utility 93

Drawing and Testing

The Draw program lets you touch the screen and draw lines, shapes,

and curves. Use the Draw program to test the operation of the

touchscreen and pen.

Opening the Draw Program

To open the Draw program, press F3.

Microcal displays a list of keys you can press when using the Draw

program. (Refer to Table 12.) Microcal automatically updates the list

of available keys based on the video mode and the type of controller

being used.

Drawing Tips

Refer to the following drawing tips to familiarize yourself with the

draw program:

Before drawing, press the space bar to clear the screen and display

a blank drawing canvas. You can also press G to clear the screen

and display a grid that you can use as a drawing guide.

If you are using a pen, you can choose between three modes for

drawing: Automatic mode (the same as Pen and Finger mode), Pen

mode, and Finger mode. Press the key for the hardware touch

mode you want.

To draw, simply touch the screen and drag your finger or pen.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 143 144

Pas de commentaire

Microsoft Windows NT 4.0 Guide Guide de l'utilisateur Page 93