Microsoft LPF-00004 Manuel de l'opérateur télécharger pdf (Page 40)

Page 22 GENERAL INFORMATION

CYBERAMP 380, COPYRIGHT MARCH 2002, AXON INSTRUMENTS, INC.

Expansion

To increase the number of signal conditioning channels, if your software supports it, up to ten

CyberAmp 380s may be "daisy chained" to one computer serial port. The RS-232 OUT port of the

first CyberAmp is connected to the RS-232 IN port of the next CyberAmp, and so on. The

interconnection cable should be a simple 25-pin flat cable, such as the RS232-02 cable from Axon

Instruments.

Each CyberAmp or compatible instrument on the daisy-chained serial bus must be set to a unique

device address by using the ten-position rotary switch on the back panel. It is not necessary for the

first instrument on the bus to receive address number 1. Device addresses can be allocated randomly

as long as the addresses are unique.

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 156 157

Pas de commentaire

Microsoft LPF-00004 Manuel de l'opérateur Page 40